Red Rock Sound EQ173 v1.0.4

Red Rock Sound推出了一款实用混音工具：EQ173话放均衡器插件，这款插件针对MS、立体声以及沉浸声混音进行设计，提供多声道混音处理方式。

EQ173基于1970年推出的经典A类晶体管麦克风/线路放大器和均衡器，其声音具有无与伦比的清晰度、光泽感和动感。插件在经典的基础上从头设计，为MS、立体声以及沉浸声混音提供快速、高效的工作流程，无需冗长繁琐的通道设置。

插件的输入路由部分，分为输入路由模块、通道选择模块和FX选择模块。其中，输入路由模块可以在从立体声到7.1.4和9.1.6的44种常见的通道设置中进行选择，用户还可以创建自己的输入路由配置文件，插件最多提供16个独立通道。通道选择模块则用于激活均衡器需要处理的通道。FX选择模块提供四种均衡器通道配置方案，用户可以自定义四种配置方案。

放大和均衡部分功能：

• Line Gain线路输入增益，从-20dB到+10dB；
• Mic Gain麦克风输入增益，从-20dB到-80dB；
• PreAmp话放，不提供增益，只产生谐波失真；
• 高频搁架式均衡，12kHz处提供约±15dB平滑调整幅度；
• 中频钟形均衡，可控制中心频率和幅值；
• 低频搁架式均衡，可调整频率，提供约±15dB平滑调整幅度；
• 低切滤波，斜率为18dB/oct，频率为50Hz、80Hz、160Hz、300Hz和关闭。

BUBBiX | 28 June 2024 | 21.4 MB

EQ173 Preamp & EQ
Red Rock Sound EQ173 is based on introduced in 1970, this hallowed class-A, transistor mic/line amp with EQ epitomizes the beautiful sound, with unparalleled clarity, sheen and bite.

Save time and avoid tedious manual workarounds with EQ173 plug-in designed from the ground up for fast, efficient work on mid/side, stereo and the objects, the beds (fixed channels) of immersive mixing environments.

Units
This module allows you to select an equalizer from four available. The equalizers are arranged in series, this allows you to process channels with different equalizers settings.
For example: the first EQ is only the mid channel, the second EQ is only the side channel, the third Eq is the left and right channel. For multi-channel modes: the first Eq is only the left and right channels, the second EQ is the center channel, the third EQ is the LFE, etc.

You can rename Unit Buttons for ease of use. To rename the selected Unit button, right-click on the button.

In order to turn on the solo (listen) of the equalizer, double-click on the selected equalizer number. The equalizer in solo mode glows yellow, to exit solo mode, double-click again. For two-channel modes, only one equalizer can be solo mode. For multi-channel modes, one or more equalizers can be soloed.
To bypass Eq processing, press the selected equalizer number one click + shift. In bypass mode, the button will glow red.

You can also copy all equalizer settings to another equalizer. To do this, select the equalizer from which you want to copy the settings, then click on the copy button, then select the equalizer to which you want to copy the settings.

Input Routing
Input Routing lets you choose between 44 common channel setups, starting from Stereo up to 7.1.4 and 9.1.6. Simply select in the input routing module the channel setup that fits your track.

You can also create your own input routing profiles. 16 independent channels are available.

Click on the edit button next to the input routing selection display. Hold down the shift button and select the desired number of channels. Name selected channels in order. Then click save and name the profile.

Channels Selection
In this module, you can select (activate) the channels that the equalizer (unit) will process.

from nfo
(64-bit: VST2, VST3, (AAX))
(32-bit: VST2, VST3)

System Requirements
Windows 7 or higher (Windows XP not tested).

转载请注明：0daytown » Red Rock Sound EQ173 v1.0.4