Siemens NX 8.5.2 MP06 Update x86/x64

Siemens NX 8.5.2 MP06 Update (x86/x64) | 848 MB

Siemens PLM Software has released an Maintenance Release 04 of NX 8.5.2 software, the latest version of their premier 3D CAD/CAM/CAE tool. Its integrated suite of design, analysis & manufacturing tools continues to push forward their ambitious vision of HD-PLM to engineers and designers.

Maintenance Pack 04 for NX 8.5.2:

1904532 Reference APPUID-OBJ is missing when altrep is created in TC
1911974 Inherit PMI with all Geometry in the Reverence set still pops up message
1929009 Load Wire is missing in NX8 5 during Toolpath Generation works in NX6
1933100 ug_mqc_askMemberViewClip and UF_DRAW_ask_view_borders ignore View Breaks
1935647 opening part the second time in a session raises the error Failed to load part
1936970 Confusing message when sending part to NX from TC that is already open in NX
1943662 wrong Attribute Notes value
1943862 Line Width has changed in NX8 5 1
1945733 Reuse Paste UI missing legend image after upgrade to NX8 5 2
1945945 CGM Overlay cause NX to hang
1946946 Reuse Paste problem for sketch based object with reference to Absolute CSys
1949409 insert reusable part on a face removed midpoint constraints in sketch
1949631 Selection problem – Detailed Filtering about the line widths attributes
1952335 Array attribute with same title, OWNING_SITE, as the given non-array attribute
1952973 Same as PR1943662 – parts for wrong Attribute Notes value
1953196 NX VDA 4955?Compliance; G-SU-FO fines Errors outside of Face-Area
1953335 NX VDA 4955?Compliance; Save in Config-File does not work
1954091 Bad cgm overlay performance for CMM translated drawing
1954214 save an Altrep dont overwrite JT data
1955588 Update mirror part after material change of original part is not ok
1957791 CMM 755 drawing overlay tool is not working
1958362 Same as PR 1952973 and PR1943662 – parts for wrong Attribute Notes value
1958426 Wrong link structure shown after opening a part from relations browser
1958485 Deviation after playback
1958753 nx crash when open component fully on a assembly
1959574 VDA Check need more than 32 GB Memory for a curve with 31 elements
1959887 Import of Legacy HRN files loads incorrect cable diameter
1959981 Bumper and Crash Barrier do not refer to the selected loading in the Base data
1960191 Display Rules block attribute mappings for specific groups
1961123 No Standard Line Width is assign during view update in NX8 5 1
1961416 After refresh in Relations browser the wave link structure disappears when con
1961537 BaseData Loadings defined by absolute values are modified
1961948 Feature to be reordered is being referenced
1962349 Assembly cannot be loaded in NX8 5 3 anymore
1963132 Internal error in Sketch with snap grid active
1963979 NX hangs while updating views in Smart Lightweight
1964645 Ordinate dimensions on Exact views are incorrect
1965779 NX crashes when the user switches between Family Template and an assembly
1966080 Using the phys_material dat NX allocated memory space
1966188 NX allocate memory after closing all parts
1967476 Thin, Normal, Thick- line width not selectable anymore in NX8 5
1967716 Check-Mate check does not honor Broken View boundaries
1967970 AttriMapping does not work for Item types not available from Display Rules
1968508 NX Attribute Mapping disabled for types that are disabled by Type Display Rules
1969039 No Standard Line Width is assign during view update in NX8 5 1
1969248 TC/NX Quantity Type in BOM will not be set correct
1969958 How to repair view from part drawings saved in NX8 5 2
1970094 Can’t open an Assembly
1970694 Wrong Toolpath Creation around an Internal Edge
1971989 Wrong Toolpath Creation around an Internal Edge
1973109 TC/NX Quantity Type in BOM will be set to A/R
1973730 TC/NX Quantity Type in BOM will not be set correct
2176652 UG Part attributes sync does not happen for Items hidden using display rules
2214504 NX8 5 – ordinate dimensions on Exact views are incorrect
2217040 Cannot load a component in the assembly which exported from TC
2223980 JT exporting is failed when Extrude:Until Next is used
2226738 [Ribbon Builder] The shape of the surface that is created is different in NX 8 5
2227401 Unable to open part file in NX8 5 2
2228052 Cannot Import Step File
2228109 If Break Corner exists, JT exporting is failed
2228373 Clicking the graphics window close button an invalid tag was passed to the tag
2228374 [CAD]Unable to open part file
2228819 Loading of a componentUGALTREP is impossible
2229021 UAF NX9 0 1 1 Feature update error occurs in Break Corner14
2229022 UAF NX9 0 1 1 Feature update error occurs in Break Corner135
2229039 UAF NX9 0 1 1 Feature update is causing SB_TAB section sketch changed
2230417 Loading of UGALTREP referred to from UGPART is impossible
6781404 NX Created Exploded Views not positioned correctly in TcVis
6905599 NX Performance Issue -Replace Sub-assy in Upper Assy with Wave Links to top assy
6931905 Issue importing drawings from CGMs, we are getting all lines as solid lines
6966287 MP: cannot adjust stub length of a weld symbol in NX 8 5 2
6975215 Failure to Open parts
6976036 File close all got invalid tag error
6976381 assembly fails to load
6984107 spreadsheet hangs up in NX drafting on edit
6985087 NXMGR: Cannot open part, Cannot Reorder Feature
6995544 MP export of dxf loses dimension leader
7108165 Banner is plotting out too large for metric parts

About Siemens PLM Software

Siemens PLM Software Division Department of Siemens Industry Automation German company Siemens AG – one of the leading suppliers of software and services for product lifecycle management (PLM). The company has six million licensed seats, more than 59,000 companies worldwide The head office is located in Plano, Texas. Siemens PLM NX system 7 includes an integrated suite of CAD/CAM/CAE applications and displays a new level of effectiveness of the concept of the product development process through the visual medium High Definition PLM. Siemens PLM NX 7 uses all the advantages of High Definition PLM technology to improve Decision-making processes during product development.

Name: Siemens PLM
Version: NX 8.5.2 MP06 Update
Home: www.plm.automation.siemens.com
Interface: multilanguage
OS: Windows XP / Vista / Seven
System Requirements: To install it you need Siemens PLM NX 8.5.2 with SSQ’s crack to be preinstalled
Size: 873.4 mb

Siemens PLM NX 8.5.3 MP06 Update Windows(X32/X64）/ Linux