Proteus是世界上著名的EDA工具(仿真软件)，从原理图布图、代码调试到单片机与外围电路协同仿真，一键切换到PCB设计，真正实现了从概念到产品的完整设计。是目前世界上唯一将电路仿真软件、PCB设计软件和虚拟模型仿真软件三合一的设计平台，其处理器模型支持8051、HC11、PIC10/12/16/18/24/30/DsPIC33、AVR、ARM、8086和MSP430等，2010年又增加了Cortex和DSP系列处理器，并持续增加其他系列处理器模型。在编译方面，它也支持IAR、Keil和MATLAB等多种编译器。
Proteus软件是英国Lab Center Electronics公司出版的EDA工具软件，它不仅具有其它EDA工具软件的仿真功能，还能仿真单片机及外围器件。它是目前比较好的仿真单片机及外围器件的工具。虽然目前国内推广刚起步，但已受到单片机爱好者、从事单片机教学的教师、致力于单片机开发应用的科技工作者的青睐。
Proteus 8.3 SPx with Advanced Simulation | 255 mb
Labcenter Electronics, a leading developer of electronics CAD (schematic, simulation and PCB autorouting) software, has released an update (SP2) to Proteus 8.2. This release expanded on Proteus 8.1 with a strong focus on library parts in both the schematic and the layout modules. Our other main development thrust was on documentation and report generation with the introduction of a new module in Project Notes and a major rework of the Bill of Materials module. On the Proteus VSM front, we have been working hard on the Arduino product as well as introducing support for new Atmel Cortex-M3, PIC16 and PIC18 processor variants.
Importing Components (BSDL)
The boundary scan description language (BSDL) is a description language for electronics testing using JTAG. It has been added to the IEEE Std. 1149.1, and BSDL files are increasingly well supported by JTAG tools for boundary scan applications, and by test case generators.
From a schematic and PCB perspective there are two main benefits in this file format:
– The part name, number of pins, electrical type and pin names are all part of the file. This means we can automatically create a basic schematic component for the part.
– The binding between each pin name on the schematic and the pad name of the footprint is included. This means that we can provide an assisted/automatic packaging for the schematic component.
Importing Footprints (PADS ASCII)
Proteus provides a lot of flexibility and functionality for creating different types of footprints and putting them into libraries for re-use. However, for complex parts or where a lot of parts are needed, the use of third party tools can get the job done faster. Also, if libraries of parts exist from a different product, it is helpful to translate and import them into Proteus.
The PADS ASCII Library Part importer is the mechanism by which we support this. PADS ASCII (Layout format) is a widely recognised file format for describing a PCB footprint and offers a semi-automatic way to translate a footprint into a Proteus library part. Proteus now fully supports the PCB Library Expert Toolchain for creating complex footprints.
Project Notes
Project Notes is a new application module in Proteus for adding documentation or written content to the project. It is a free-form editor so you can add whatever you like in whatever style you want. This may be as simple as scribbling a TBD list at the end of the working day or as formal as an approved revision history for the project. Project Notes are stored inside the main Proteus file (*.PDSPRJ) but can be printed separately or exported to PDF. They can also be appended to the end of the BOM PDF report or included inside the CADCAM ZIP file.
Bill of Materials
The Bill of Materials module has gone through a major revision with the following significant changes:
– Switch from screen based layout to physical (page size) layout engine.
– Support for portrait and landscape modes.
– Dialogue driven report styling.
– Addition of links for report content to external sites.
– Automatic appending of a Project Notes document to the PDF output.
Miscellaneous Changes
– Tighten up the shape of the solder resist mask around the corners of rectangular pads.
– Added Pre-production check warnings for possible solder bridge points.
– Changed drc display and pick and place output to use the working unit set (metric or imperial).
– Maximum zoom level for ARES increased by a factor of 10.
– Added an automatic ‘move to’ option relative to part origin.
About Labcenter Electronics Ltd.
Labcenter Electronics Ltd. was founded in 1988 by the chairman and chief software architect John Jameson. The initial launch of our Proteus design suite followed soon after and has since benefited from nearly 25 years continuous development, evolving into one of the most cost effective, fully featured EDA packages on the market. With current sales in over 50 countries spanning the globe Labcenter is continuously expanding both its product portfolio and its customer base.
Name: Proteus
Version: 8.2 SP3
Home: http://www.labcenter.com
Interface: english
OS: Windows XP / Vista / 7even / 8
Size: 144.6 mb
Download uploaded
http://uploaded.net/file/txrdnc82/otPDeS83S2.rar
Download nitroflare
http://www.nitroflare.com/view/933A22A6927FC07/otPDeS83S2.rar
Download 城通网盘
http://www.bego.cc/file/114207709
Download 百度云
链接: http://pan.baidu.com/s/1c0Fb3eK 密码: d12f