SPI SheetMetalWorks 2016.1

SheetMetalWorks是专门为钣金加工业中的SolidWorks用户而研制的，它利用功能强大的基本系统，可以生成利用SolidWorks进行钣金设计的总体生产方 案。这样，SPI就可以把SolidWorks中的缩短计算扩展到用户随时可自由配置的材料管理，因而从一开始就可以正确地做到材料的配给.

SPI SheetMetalWorks 2016.1 | 116.3 mb

SPI GmbH, introduced SheetMetalWorks 2016.1, is the certified Goldpartner Solution for the SOLIDWORKS CAD software, fully integrated into the current Version, and – even in the case of complex designs, facilitates fast and ready to manufacture sheet metal unfolding.

SPI’s SheetMetalWorks enhance the respective basic system by adding decisive, tried-and-tested functions – particularly as regards the closed process chain and digital transfer to the respective NC programming system. SPI SheetMetalWorks is fully integrated into the current SOLIDWORKS CAD software and facilitates precise sheet metal unfolding – even in the case of complex constructions. Special libraries are available for unfolding components consisting of a single part or of assemblies, transitions and connections, and can be expanded to accommodate as many of your own parametric components as you like.

The solution specifically addresses the needs of companies involved in the design and manufacture of sheet metal parts and assemblies. It significantly increases the number of ready-to-manufacture products and makes the design process instant, resulting in dramatic time savings between concept and the testing of actual parts. Solids are created and modified quickly solids through an extended, intuitive, and dedicated command set, supporting typical sheet metal operations.

SPI SheetMetalWorks allows easy, fast, and accurate modifications (variants). Once the design is complete, an extremely fast, automatic 2D flat is generated from the 3D solid. During the unfolding cal­­­cu­lation the sheet metal part will be automatically analyzed. All bend allowances are calculated.

SPI SheetMetalWorks at a glance:

– Unfolding according to DIN 6935 standards
– Unfolding of imported files tolerances also allow unfolding if inaccuracies appear
– Calculation of unfolding depending on table, k-factor, formula, or TruTops standards
– Additional information for bending programs of Delem and Cybelec
– GEO Export with all bending line information for TruTops
– Unfolding considers production radius depending on bending angle per bend
– Detailed log file with references to solid model
– Alignment of used design radii and real production radii
– Unfolding without reliefs at corners and flanges
– Optional setting of reliefs during the unfolding process
– Arbitrary corner stamps (square, circle, rhombus, laser edge) available
– Arbitrary definition of length of polygon edges to enable nibbling
– Spline or polygon curve representation
– Customizable colors, line styles, and line weights for contour elements, bending lines, and other parts of flat pattern
– Unfolding of freeform surfaces (e.g., lofted parts) and other imported surfaces
– Bending lines and bending zones, bending line table
– Bend marks
– Unfolding of freeform surfaces with creation of bend lines for successive bending
– Unfolding of cylindrical and conical faces with large diameters with an arbitrary number of bends (facets)
– Unfolding of single faces, even of solids
– Unfolding in new drawing view, new part sketch, or in selected open document
– 2D sketch available in SolidWorks without restrictions
– Update of the unfolding after modification of the model is possible
– Library of punching tools
– SPI Component Manager included

SPI SheetMetalWorks What’s New 2016: smworks_whats_new_16_e.pdf

转载请注明：0daytown » SPI SheetMetalWorks 2016.1